Izdelki za stroji za odrezovanje (1004)

IDEA assembles cages by means of the patented 'Schnell System' (Patented). Using three thin longitudinal wires ,which may be welded to any point of the stirrup's exterior surface IDEA cage assembling machine is able to halfassemble lattice girders of stirrups of any shape and size. The halfassembled girder is now ready to be finished off by fixing the frame carrying bars. As the stirrups have already been welded at the correct distance, the carrying bars may be only tied every 5 or 6 stirrups. This means saving up to 60% on assembling costs; maximum flexibility girders may be assembled with stirrups of any shape and size; besides this system avoids all size restrictions and material waste involved with the use of electrowelded mesh; high quality standards the girders obtained with this system are far more precise and stiff than their traditional counterparts and they do not face any risk during transport. Minimum stirrup:150x150 mm (6"x6") Maximum stirrup:1500x1500 mm (5'x5') Wire Ø:6÷16 mm (#3÷#5) Pulling Speed:45 m/min (150 ft/min) Average power consumption:8 kWh

Cortar al final de la bobina antes de empezar a cortar la siguiente bobina.

Corte Transversal Máquinas Tipo Tiromat, … - CUCHILLA PARA EL CORTE DE MATERIALES MÉDICOS, BOLSAS DE SUERO FISIOLÓGICO, KITS

Our AYK 750 model is manufactured to have 30 – 300 mm of coil width and maximum 3 mm of coil thickness. It has 750 kilograms of coil carrying capacity and an inner tightening engine with conical mandrel tightening. Loop control proximity sensor has speed control and pneumatic upper arm has automation. This model is motorized, including motor reducer to transfer power to mandrel. Coil Carrying Capacity:750 kg Coil Inner Diameter:470 – 530 mm Coil Outer Diameter:1400 mm Coil Mandrel Width:20 – 300 mm Mandrel Speed:12 rpm

Der Laser Cutter M-800 ist mit einer Bearbeitungsfläche von 830 x 1330 mm für alle Anwendungsmöglichkeiten des Laserschneidens für Folien und Folientastaturen bestens gerüstet. Ein besonderes Highlight ist das optionale Shuttletisch-System, welches Ihre Produktivität beinahe verdoppelt. So haben Sie auch schon mit einem "kleineren" Laser Cutter alle Trümpfe in der Hand. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.330 mm x 830 mm Abmessungen (BxLxH)::2.730 mm x 1.970 mm x 1.600 mm Materialdurchlassbreite::1.642 mm Tischdurchlasshöhe::15 - 55 mm (ohne Materialträger) Laserleistung::60 bis 450 Watt Geschwindigkeit::1 - 1.414 mm/s (in 1 mm Schritten) Beschleunigung::max. 14,1 m/s²                         

Avec la machine de découpe et de gravure laser XL-1200, eurolaser donne la possibilité de traiter des plaques de matériaux particulièrement larges, en conservant des dimensions de machine modérées. La surface de travail de la machine est de 2270 x 1230 mm. Grâce à la reconnaissance par caméra, disponible également pour d’autres tailles de machines, le traitement de matériaux imprimés peut être automatisé et l’efficacité du laser encore améliorée. Zone de travail (largeur x longueur)::2270 mm x 1230 mm (89.3" x 48.4") Dimensions extérieures (largeur x longueur x hauteur)::3670 mm x 2010 mm x 1600 mm (144.4" x 79.1" x 62.9") Laize::2582 mm (101.6") Hauteur sous portique::15- 55 mm (sans support du matériau) 60 to 600 watt Puissance laser::1 - 1,414 mm/s (par paliers de 1 mm) Vitesse::max. 14,1 m/s²

Our AYK 2500 model is manufactured to have 30 – 500 mm of coil width and maximum 4 mm of coil thickness. It has 2500 kilograms of coil carrying capacity and an inner tightening engine with conical mandrel tightening. Loop control proximity sensor has speed control and pneumatic upper arm has automation. This model is motorized, including motor reducer to transfer power to mandrel. Coil Carrying Capacity:2.500 kg Coil Inner Diameter:470 – 530 mm Coil Outer Diameter:1400 mm Coil Mandrel Width:30 – 500 mm Mandrel Speed:14 rpm

Auf einer Bearbeitungsfläche von 1.800 x 3.200 mm lassen sich Schneid- und Gravuranwendungen bei Hölzern durchführen. Diese Lasermaschine gehört zu den größten der eurolaser Cutter-Serie und ist mit zahlreichen Optionen erhältlich. Eine ideale Maschinengröße für alle Anwendungen, bei denen viel Platz benötigt wird. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.800 mm x 3.200 mm Abmessungen (BxLxH)::3.520 mm x 3.940 mm x 1.600 mm Materialdurchlassbreite::1.880 mm Tischdurchlasshöhe::58 - 80 mm (je nach Materialträger) Laserleistung::60 bis 650 Watt Geschwindigkeit::1 - 1.414 mm/s (in 1 mm Schritten) Beschleunigung::max. 9,1 m/s²

Stirrup bender and bar shaping machine from coil with disk bending system for the production of stirrups and shaped wires with bends at both ends using wires up to Ø 14 mm (#4). Driven by electric servomotors. This automatic shaping and stirrup bender from coil is equipped with Max. pulling speed 150 m/min (500 ft/min) Straighteners (horizontalvertical) with electronic and independent setting for the 2 wires with Joystick Disk bending unit Cutting with Brushless motors Cutting unit with adjustable wire guide, reversible mobile and fixed cutting blades Web Teleassistance Processed wire type:Coil Single strand:1 Ø 6÷14 mm (#4) Double strand:2 Ø 6÷10 mm (#3) Pulling speed:150 m/min (500 ft/min) Bending speed:2345°/sec Average power consumption:4 kWh

The rotor type wire straightening machine RI 6 is suitable for processing a wide range of smooth cold drawn industrial wires from Ø 2,5mm to Ø 6mm. The 4 independent servomotors allow Excellent straightening quality; Max. pulling speed 160 m/min; Burrfree highprecision cutting (tolerance of ±0.1 mm). A wide range of wires can be processed depending on the machine configuration from mild steel to annealed and galvanized wire, highstrength steels such as stainless steel, springs steel and nonferrous wires such as brass, bronze, copper and aluminum using special equipment. The wide range of accessories allows you to customize the machine to the different needs of the industrial market

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size wooden plates. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. Working area (w x l):2,270 mm x 3,200 mm (89.3" x 126") DIMENSIONS (W X L X H):3,990 mm x 3,940 mm x 1,600 mm (157.0" x 155.1" x 62.9") Material width:2,350 mm (92.5") Material clearance:58 - 80 mm (according to material support) Laser power:60 to 650 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 9.1 m/s² (358"/s²)

Avec une surface de travail de 2270 x 3200 mm, le système de découpe laser CO2 XL-3200 est le plus grand modèle de la série XL. Ses dimensions gigantesques permettent le traitement de superficies de matériaux particulièrement importantes. Même avec cette grande taille, une efficacité optimale est assurée, grâce à la haute vitesse d’accélération de la tête optique, d’où provient le faisceau laser de découpe. Zone de travail (largeur x longueur)::2270 mm x 3200 mm (89.3" x 126") Dimensions extérieures (largeur x longueur x hauteur)::3990 mm x 3940 mm x 1600 mm (157.0" x 155.1" x 62.9") Laize::2350 mm (100.0") Hauteur sous portique::58 - 80 mm (en fonction du support du matériau) Puissance laser::60 to 650 watt Vitesse::1 - 1,414 mm/s (par paliers de 1 mm) max. 9.1 m/s²

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 22 mm (#7). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Coil Straightening capacity:1 Ø 8÷22 mm (#7) Bending capacity:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Le système XL-1600 est la solution professionnelle pour le traitement au laser des textiles. Grâce au convoyeur automatique, les textiles sont découpés directement depuis la bobine. En effectuant des essais de découpe avec vos différents matériaux, nous pouvons déterminer quelle configuration laser vous apportera un résultat optimal. Zone de travail (largeur x longueur)::2270 mm x 1600 mm (89.4" x 63") Dimensions extérieures (largeur x longueur x hauteur) ::4050 mm x 2380 mm x 1530 mm (159.5" x 93.7" x 60.2") Laize::2550 mm (100.0") Hauteur sous portique::58 - 80 mm (en fonction du support du matériau) Puissance laser::60 à 600 Watt Vitesse ::1 - 1414 mm/s (par paliers de 1 mm) Accélération ::max. 9,1 m/s²

The CO2 laser machine XL-3200 with a processing area of 2,270 x 3,200 mm (89.3" x 126") is the largest model of the XL series. The huge dimensions allow the processing of big-size materials. The high acceleration of the optical head releasing the laser beam assures best efficiency even on this table size. The modular design enables eurolaser systems to be specially configured to suit every requirement. We analyze your requirements and configure the laser system individually for you. The usage of eurolaser laser machines enables you to process a wide range of materials, such as cutting of plastics, foams, textiles, adhesive foils, wood, acrylic, composite materials and much more. We are pleased to run a cutting test in our Application Center by using your individual material. Subsequently, you will receive a detailed test report in order to identify how your material was cut and engraved with our laser machines. Working area (w x l):2,270 mm x 3,200 mm (89.3" x 126") DIMENSIONS (W X L X H):3,990 mm x 3,940 mm x 1,600 mm (143" x 152" x 51.9") Material width:2,350 mm (92.5") Material clearance:58 - 80 mm (according to material support) Laser power:60 to 650 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 9,1 m/s² (358"/s²)

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 32 mm (#10). Driven by digital electric servomotors. Bar Wiser 32 bar shaping machine are equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Processed wire type:Bar Single strand:1 Ø 10÷32 mm (#10) Double strand:2 Ø 10÷22 mm (#7) Pulling speed:180 m/min (600 ft/min) Bending speed:450°/sec Average power consumption:3 kWh

Le système de découpe laser 2XL-3200 est un des plus grand dans la série LCS. Avec lui, eurolaser permet un traitement sur une surface de 2740 x 3200 mm. Les matériaux de grand format, tels que les textiles, peuvent ainsi être découpés, gravés et marqués de manière précise et fine. La découpe sans contact par laser évite toute distorsion des tissus. Zone de travail (largeur x longueur)::2740 mm x 3200 mm (107.8" x 126.0") Dimensions extérieures (largeur x longueur x hauteur)::4460 mm x 3940 mm x 1600 mm (175.5" x 155,1" x 62.9") Laize::2820 mm (111.0") Hauteur sous portique::58 - 80 mm Puissance laser::60 à 650 Watt Vitesse::1 - 1414 mm/s Accélération::max. 9.1 m/s²

Our company BOSPORAS, mass produces AMD models with static body and in accordance with Conformité Européenne (CE) regulations. Our understanding of making the “quality” our top priority has made us the top choice among customers. AMD model products are manufactured to work between 0,3 and 3 millimeters of thickness and, 100 and 200 millimeters of width. AMD model consists of 7 rollers that have HRC 58-60 surface stiffness which 5 of them have 60 millimeters diameter and two of them have 80 millimeters of diameter. AMD models don’t need any external guidance because they minimize the distance between Press body and the template. Material Width:20 - 200 mm Material Thickness:0,5 - 5 mm

Cuchillas Para Cortadora -hendedora - CUCHILLAS PARA LA FABRICACIÓN DEL CARTÓN ONDULADO

Bar bending machine. Bending disk and adjustable strength steel saddles. Capacity 1 bar Ø 32 mm (#10) Plate revolving speed 9 RPM Plate revolving speed:9 rpm Installed power:1.5 kW Machine's weight:290 kg (640 lb) Machine dimensions:76x81x86(h)cm (30"x32"x34"h)

Bidirectional stirrup bender and bar shaping machine from bar for the production of stirrups, shaped wires and cuttosize bars using bars up to Ø 25 mm (#8). Driven by electric servomotors. These automatic stirrup benders and bar shaping machines are equipped with Max. pulling speed 120 m/min (400 ft/min) Semiautomatic cycle for shaped wires with bends on both ends Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) 3D version for the production of tridimensional pieces. Processed wire type:Bar Single strand:1 Ø 8÷25 mm (#8) Double strand:2 Ø 8÷16 mm (#5) Pulling speed:120 m/min (400 ft/min) Bending speed:840°/sec Average power consumption:2 kWh

Automatic rebar bending machine for bars up to Ø 40 mm. It works automatically and bends any kind of shapes, positive and negative bends included. Automatic system for bars feeding and discharging 2 adjustable bending speeds Bending speed:35-40°/sec Average power consumption:1.5 kWh

Our 7-roller straightener servo feeders work between 300 and 1.600 millimeters of width and, 0,5 and 5 millimeters of thickness. Our straightener servo machines’ full-auto piloting system works with feeder and straightener rollers. Our company mass produces 7-roller Model with static body and in accordance with Conformité Européenne (CE) Regulations. Material Width:30 - 1600 mm Material Thickness:0,5 - 5 mm

Couteaux Et Refouleurs Pour Mitrailleuse - COUTEAUX INTERVENANT DANS LA FABRICATION DU CARTON ONDULE

Etikettieren Sie Ihre Einzelteile schnell und in einem Arbeitsgang für die Weiterverarbeitung. Oder kennzeichnen Sie Ihre Produkte mit Ihrem Marken-Logo.

Le système de découpe laser M-800, d’une surface de travail de 830 x 1330 mm (52.3" x 32.6"), est parfaitement équipé pour tous les travaux de découpe des films et claviers à membrane. Un de ses points forts, l’option Shuttle Table (système de table navette), permet de presque doubler sa productivité. Avec ce „petit“ système laser, vous avez tous les atouts en mains. Zone de travail (largeur x longueur)::1330 x 830 mm (52.3" x 32.6") Dimensions extérieures (largeur x longueur x hauteur)::2730 mm x 1970 mm x 1600 mm (107.4" x 77.5" x 62.9") Laize::1642 mm (64.6") Hauteur sous portique::15 - 55 mm (sans support du matériau) Puissance laser::60 à 450 Watt Vitesse::1 - 1,414 mm/s (par paliers de 1 mm) Accélération::max. 14.1 m/s²

Wood can be cut and engraved on a processing area of 1,800 x 3,200 mm (70.8" x 126"). This CO2 laser machine is one of the largest among the eurolaser series and is available with many optional features. An ideal machine size for all applications requiring plenty of space. Working area (w x l):1,800 mm x 3,200 mm (70.8" x 126.0") DIMENSIONS (W X L X H):3,520 mm x 3,940 mm x 1,600 mm (138,5" x 155,1" x 62,9") Max. material width:1,880 mm (74.0") Material clearance:58 - 80 mm (according to material support) Laser power:60 to 650 watt Speed:1 - 1,414 mm/s (in steps of 1 mm) Acceleration:max. 9.1 m/s² (358"/s²)

Bidirectional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cuttosize bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with Max. pulling speed 180 m/min (600 ft/min) 2 bending units (upper and lower) Clamp for extraction of the end part of the bar Virtual mandrel Web Teleassistance Automatic loader Genius (Optional) Bar Wiser 28 Pack 0 Storage rack pneumatically operated. Processed wire type:Bar Single strand:1 Ø 8÷28 mm (#8) Double strand:2 Ø 8÷20 mm (#6) Pulling speed:180 m/min (600 ft/min) Bending speed:574°/sec Average power consumption:3 kWh

Das Laser Cutter- und Gravur-System L-1200 für die Holzbearbeitung bietet einzigartige Präzision und Schnittqualität bei höchsten Schnittgeschwindigkeiten, die sich je nach zu bearbeitenden Material durch individuelle Laserleistungen anpassen lassen. Alle eurolaser Cutter-Systeme sind mit Laserleistungen von 60-650 Watt erhältlich. Für Sie bedeutet das anwendungsbezogene Effizienz. Der bedarfsorientierte, modulare Aufbau der eurolaser Lasersysteme ermöglicht eine an jede Anforderung speziell angepasste Konfiguration und bietet gleichzeitig die erforderliche Flexibilität. Der Aufbau der Maschine orientiert sich vorwiegend an den Erfordernissen, die sich aus der späteren Nutzung ergeben. Arbeitsfläche (BxL)::1.800 mm x 1.230 mm Abmessungen (BxLxH)::3.200 mm x 2.010 mm x 1.600 mm Materialdurchlassbreite::2.112 mm Tischdurchlasshöhe::15 - 55 mm (ohne Materialträger) Laserleistung::60 bis 650 Watt Geschwindigkeit::1 - 1.414 mm/s (in 1 mm Schritten) Beschleunigung::max. 14,1 m/s²

La machine de découpe M-1600 pour films, d’une surface de travail de 1330 x 1630 mm, permet des découpes et des gravures de haute qualité. Grâce à l’installation optionnelle de la Shuttle Table (système de table navette) eurolaser, la productivité peut encore être améliorée. Cette combinaison est particulièrement adaptée pour le traitement des films et des claviers à membrane. Zone de travail (largeur x longueur)::1330 mm x 1630 mm (52.3" x 64.2") Dimensions extérieures (largeur x longueur x hauteur)::2730 mm x 2410mm x 1600 mm (107.4" x 94.6" x 62.9") Laize::1642 mm (64.6") Hauteur sous portique::15 - 55 mm (sans support du matériau) Puissance laser::60 à 650 Watt Vitesse::1 - 1,414 mm/s (par paliers de 1 mm) Accélération::max. 14,1 m/s²